Skip to content
Valora Decor

Walk-ins welcome

Alpharetta showroom

Same-day pickup

On stocked finishes

From $69

Per panel

9.5 ft × 2 ft panels

Full height

Trade pricing

For professionals

Guide · Installation

LED aluminum channel size guide

Pick an LED aluminum channel by three things: the inside width (your strip must sit flat), the depth (deeper means a smoother line) and the mount (surface, recessed or corner).

Written by the Valora Decor team at our Alpharetta, GA showroom, where we stock and sell these panels.

Our LED aluminum channels are coming soon. Use this guide to pick the right one.

Why use a channel at all?

  • Heat. Aluminum draws heat away from the LEDs, which helps them last.
  • A smooth line. The frosted diffuser blends the LEDs into one even line. With COB LED strip the line is already continuous, and the channel adds a finished edge.
  • Protection and a clean look. No exposed strip, no peeling adhesive, no dust on the LEDs.

Sizes we are bringing in

ProfileInches (W x H)mmMount
12*7 SF0.47 x 0.28 in12 x 7Surface
12*7 CC0.47 x 0.28 in12 x 7Flanged / recessed
16*16 CN0.63 x 0.63 in16 x 16Corner
20*10 SF0.79 x 0.39 in20 x 10Surface
20*15 SF0.79 x 0.59 in20 x 15Surface
30*10 SF1.18 x 0.39 in30 x 10Surface
30*20 SF1.18 x 0.79 in30 x 20Surface
40*20 SF1.57 x 0.79 in40 x 20Surface
50*35 SF1.97 x 1.38 in50 x 35Surface / suspended
75*752.95 x 2.95 in75 x 75Wall-ceiling corner

Quick picks

  • Under kitchen cabinets: 20 x 10 mm (0.79 x 0.39 in), or the 16 mm corner profile to aim light at the backsplash.
  • Shelves and display cases: the ultra-slim 12 x 7 mm (0.47 x 0.28 in).
  • Routed into wood or panel joints: the flanged 12*7 CC.
  • Bright linear lines and garages: 30 x 20 or 40 x 20 mm.
  • Suspended fixtures over a table: 50 x 35 mm.
  • Indirect light where wall meets ceiling: the 75 x 75 mm corner profile.

Black or silver?

Matte black disappears against dark wood, slat walls and black hardware. Silver suits white cabinets and ceilings.

Questions

What size LED channel do I need?

Choose one whose inside width is wider than your strip so it sits flat. 20 x 10 mm (0.79 x 0.39 in) is the most common size for under-cabinet light.

Do I need a diffuser?

For dotted SMD strips, yes, it turns the dots into a smooth line. COB strip is already continuous, but a diffuser softens glare and protects it.

Can LED channels be recessed?

Yes. The flanged 12*7 CC profile sits in a routed groove so only the diffuser and a thin lip show.

Valora Decor · Alpharetta, GA

Send your wall size. Get a panel count and price.

9.5 ft × 2 ft acoustic slat panels from $69, stocked at 190 Bluegrass Valley Pkwy, Suite 133, Alpharetta. Call (615) 968-4925 or start online.

More guides

Get My Project Price